Aby korzystać z czatu, zaloguj się.
Powrót do kontaktów

Forex Envy Power Edition (Od forex_trader_47717)

Użytkownik usunął ten system.

Forex Envy Power Edition Omówić

Apr 16, 2012 at 13:11
Przeglądane 28,758
346 Replies
Uczestnik z Jun 26, 2012   52 postów
Sep 06, 2012 at 22:37
willgart posted:
paltalk posted:
many trades closed minus profit .. total is minus .. i think there are something wrong with FE in many pairs .
 

did you say that you have a negative day?

are you using the v2 or v3?
in v2, you have to monitor the account has negative basket could occurs frequently IF your broker is slow or many requotes. else the problem is small

AUDUSD could have a problem in v3. else the megative protection works fine.

Except these 2 cases, I never got any negative batch. its always a success and profit :)

thanks willgart
i am using Forex Envy v3.0.19
i removed the expert from audusd chart .
it happened with nzdusd, usdcad
i dont know why ?
Uczestnik z Aug 20, 2011   588 postów
Sep 06, 2012 at 22:44
contact the support , maybe they can help you...
Uczestnik z Jun 24, 2012   69 postów
Sep 07, 2012 at 02:32
I have had problem with AUDNZD recently, on 2 brokers, Both has very fast quote system, It shows strange quote with SL, No TP ETC, I closed down this pair on this broker.

Today, It showed negatives baskets again on EURJPG just in front of me from $100 profit into -$180 lose, It is nothing wrong with FE3, One of FE recommanded brokers, I hate to say it, they scam. Well, I am closing down everything from this broker. ( Why me lose again?)

Paltalk, Since you are using VPS, Did you try it on your own computer before you load it in VPS?.

I don't see negative basket often in FE 3, you should really ask support.










Uczestnik z Jun 26, 2012   52 postów
Sep 07, 2012 at 09:25
willgart
Rickyv101
Thank you for your attention
i resolve the problem .. it is ok now
thank you again .
Uczestnik z Feb 10, 2012   1 postów
Sep 07, 2012 at 09:27
paltalk posted:
i am using Forex Envy v3.0.19

Any reason you aren't using the 3.0.21? It's been out for a while now.
Uczestnik z Aug 20, 2011   588 postów
Sep 07, 2012 at 11:26
Rickyv101 posted:
I have had problem with AUDNZD recently, on 2 brokers, Both has very fast quote system, It shows strange quote with SL, No TP ETC, I closed down this pair on this broker.

Today, It showed negatives baskets again on EURJPG just in front of me from $100 profit into -$180 lose, It is nothing wrong with FE3, One of FE recommanded brokers, I hate to say it, they scam. Well, I am closing down everything from this broker. ( Why me lose again?)

Paltalk, Since you are using VPS, Did you try it on your own computer before you load it in VPS?.

I don't see negative basket often in FE 3, you should really ask support.


AUDNZD could suffer a huge spread from the broker (could be 10 or more). also take a look at the minimum pips to place a TP value. if the minimum is 30 pips and FE try to place a TP at 25pips, the EA will fail to place the TP.
Uczestnik z Jun 26, 2012   52 postów
Sep 07, 2012 at 12:06
PisceanTrader posted:
paltalk posted:
i am using Forex Envy v3.0.19

Any reason you aren't using the 3.0.21? It's been out for a while now.
Piscean
thank you very much for that notice..
regards
Uczestnik z Jun 26, 2012   52 postów
Sep 07, 2012 at 12:14
what can we do to prevent FE from closing any trade by minus ?
thanks
Uczestnik z Aug 20, 2011   588 postów
Sep 07, 2012 at 12:18
paltalk posted:
what can we do to prevent FE from closing any trade by minus ?
thanks
v3 has the negative basket protection. so nothing to do.

also, use this indicator:
https://umeku.com/fx/basketExposure/
to track the FE activity and identify negative baskets.
and go to the official FE forum to get a script which can be used to move the TP of a batch of trades.

but again v3 do it itself (except the audusd bug)
Uczestnik z Jun 26, 2012   52 postów
Sep 07, 2012 at 12:23
willgart posted:
paltalk posted:
what can we do to prevent FE from closing any trade by minus ?
thanks
v3 has the negative basket protection. so nothing to do.

also, use this indicator:
https://umeku.com/fx/basketExposure/
to track the FE activity and identify negative baskets.
and go to the official FE forum to get a script which can be used to move the TP of a batch of trades.

but again v3 do it itself (except the audusd bug)
willgart
thanks
i understand that negative basket protection make the basket not negative
if false it let you close the trades ..
am i correct ?
Uczestnik z Apr 18, 2012   45 postów
Sep 07, 2012 at 20:54
If you are being scammed by a broker why are you not telling us which broker is scamming you?
The whole purpose of this forum is for us to learn from each other.

Rickyv101 posted:
I have had problem with AUDNZD recently, on 2 brokers, Both has very fast quote system, It shows strange quote with SL, No TP ETC, I closed down this pair on this broker.

Today, It showed negatives baskets again on EURJPG just in front of me from $100 profit into -$180 lose, It is nothing wrong with FE3, One of FE recommanded brokers, I hate to say it, they scam. Well, I am closing down everything from this broker. ( Why me lose again?)

Paltalk, Since you are using VPS, Did you try it on your own computer before you load it in VPS?.

I don't see negative basket often in FE 3, you should really ask support.










If you are makeing less than 100% a month you aren't doing it right!
Uczestnik z Jun 24, 2012   69 postów
Sep 07, 2012 at 23:59
Hi Tneedham:

<<If you are being scammed by a broker why are you not telling us which broker is scamming you?>>
Case was not closed, so I didn't want to mention their name, I sent email to that broker to look into this case, They fixed that trade for me, From - $200 to $100 profits. Anyway, not sure that they scam or not, because of this, I do not want to mention their name, However, If your account has really large negative basket, you should take a look and find out what is the problem.



Uczestnik z Jun 24, 2012   69 postów
Sep 08, 2012 at 00:06
willgart posted
AUDNZD could suffer a huge spread from the broker (could be 10 or more). also take a look at the minimum pips to place a TP value. if the minimum is 30 pips and FE try to place a TP at 25pips, the EA will fail to place the TP.

Hi Willgart:
I am trying to find out why they behave like this, I have one broker, His spread for AUDNZD is 20pips, and even GBDUSD spread is 3 pips, I never have negative basket.

Yesterday, I had a small negative close basket in USACAD long, I am still not sure where is the problem, broker problem or FE 3 bugs?

 
Uczestnik z Mar 19, 2012   82 postów
Sep 10, 2012 at 11:11
Hi,

How is this Envy Power running on 5K starting balance? I have 9.6K USD. Can I start from it even though they recommend 18K?

All the best
Uczestnik z Aug 20, 2011   588 postów
Sep 10, 2012 at 11:38
viltus posted:
Hi,

How is this Envy Power running on 5K starting balance? I have 9.6K USD. Can I start from it even though they recommend 18K?

All the best
yes, but not using a standard account.
a cents account or a micro or nano account.
Uczestnik z Apr 18, 2012   45 postów
Sep 10, 2012 at 12:32
You could run at .5 risk. And if you want to really be safe turn all the short cycles to Freeze after take profit.. Till you get back to 18K.

viltus posted:
Hi,

How is this Envy Power running on 5K starting balance? I have 9.6K USD. Can I start from it even though they recommend 18K?

All the best
If you are makeing less than 100% a month you aren't doing it right!
Uczestnik z Jun 24, 2012   69 postów
Sep 11, 2012 at 03:22
Hi Viltus:

I am extremely bad luck than anyone whole life, not sure why but hope you understand.

Do not running your Envy power underfund, I had one real account blew because It needed 18K to run but I ran it with near 13K with few pairs less, it blew up and I lose 14K. ( 1k more than I had)

Very careful with risk setting, If this setting need 18K to run, with risk setting 0.5, you still need 18K, not 9K, It is something to do with min. baselot size, you should send support question, They will explain it to you.

Also, make sure find a good broker without extremely market making, Their data feeding will screw up Envy power user, I am running few small accounts on one broker, most of them are fine but one account is extremely danger now, Its USDCAD is at level 15 with 193 lots now, I might have to 'chicken out' and make a big lose.

Not sure why, Power Envy 3.021 do not run well, On broker Lifeforex, it is really bad, 3 negative baskets (AUDNZD, EURUSD, AUDUSD), I checked the logs and I am sure that bugs in Power envy 3.021, It put buying TP setting to selling TP setting and broker server refused then it back and fort order until order go thru with negatives basket for whatever reason E.X. double order, hope they fix it fast.















Uczestnik z Aug 20, 2011   588 postów
Sep 11, 2012 at 03:39
First, we know we'll lost the account. when? sometimes quickly, sometimes later...
I got a MC in the first 2 weeks after I start my account, like you, just underfound one. the missing money was what was required to get a good profit...
(it was with v2)
Second, the minimum recommended is the minimum no matter the risk factor setup. the risk factor is usefull only when you have more capital than the minimum and you want to reduce your risk. (or if you raise the risk factor to increase the profit)

I'm using instaforex and I do not have special issue on any pair. the broker accept all my trades. I switch to an eurica account where the execution speed is better, I'll compare the results...
and I do not use the hidden TP /SL option. if the execution speed is not more than perfect, its a way to lost for sure! you'll need some seconds to close a big batch, and if the market move a lot, you can loose. the hard TP is more secure.
I think LiteForex is the broker which dislike FE due to the large number of ordermodify commands sent to the servers.

Finally I also a big basket on USDCAD. Apparently we have reached a certain level here, and some analysts think that the trend will reverse, but they wait for a confirmation before acting.
Uczestnik z Apr 18, 2012   102 postów
Sep 11, 2012 at 03:53 (edytowane Sep 11, 2012 at 03:54)
Hi Will,

Just because you have not seen this reported bug does not mean it is not VERY real.
 
I have given up using 3.0.
Why?
Because of Bugs reported and not fixed.
FE need to start fixing the bugs that have been reported, like the 'Shadow Trade' BUG (shadow 0.01 lot trades) that I found and other have now been reported.
Robert told me the Shadow Trades were the results of how the PAMM worked.
Can't see that happening.
Now others NOT running a PAMM have reported Shadow Trades.

So in the future when someone reports a BUG, don't just say
>>> for me it's working OK' <<<

Cause guess what?
That bug will bit you in the ASS one day and cost you MONEY.

WE NEED TO REPORT EVERY BUG TO FE
and stop saying 'It Works OK for me'
which implies the bug is not real.
No ROI in a dead account
Uczestnik z Aug 20, 2011   588 postów
Sep 11, 2012 at 04:11
BB you are still a bit too agressive... (I'm a developper and I know what's a bug and when somebody say I have a bug, its certainly true, but sometimes more investigation is required as the bug is not always where we think it was....)

its not because I'm saying that I dont suffer the issue that the bug doesn't exists.
I'm just sharing my experience, and the only bug I suffered was the audusd one.
I dont have other issues with my instaforex accounts.

part of the solution to potential bug or broker related issue is to spread your money into different brokers.
you can suffer a bug or a broker issue on 1 account but myabe not on the second broker...

and its good to report a bug when you found one.
its not a reason to be agressive. maybe ricky will be happy to open an instaforex account and found that this broker doesn't suffer the issues like liteforex, and maybe not... so let him respond to my comment, and do not answer for him...
You must be connected to Myfxbook in order to leave a comment
*Komercyjne wykorzystanie i spam są nieprawidłowe i mogą spowodować zamknięcie konta.
Wskazówka: opublikowanie adresu URL obrazu / YouTube automatycznie wstawi go do twojego postu!
Wskazówka: wpisz znak@, aby automatycznie wypełnić nazwę użytkownika uczestniczącego w tej dyskusji.