ForexCure "의 게시물 - 페이지 6

FX Cure EA (TEA Free) 일반 에서 Nov 20, 2013 at 12:45

Okay, here is the manual for all-d==================================

FX Cure EA (TEA Free) 일반 에서 Nov 20, 2013 at 12:43

Hi Chan77. That setting of 2 is not a valid one. It can only be set to matchactual Tom's EA multiplier values such as 1 (for 1X), 3 (for 3X), 6 (for 6X),9 (for 9X), etc. So, you can expect that setting of 2 to spit out hilarious trades!Please find your manual...-Drew=================================================

FX Cure EA (TEA Free) 일반 에서 Nov 13, 2013 at 03:12

Nice work Jack.Pease detail the error a little more and I'll pass it to the programmer.He's very fast at these things, so not to worry...-D===============================================

FX Cure EA (TEA Free) 일반 에서 Nov 10, 2013 at 16:16

No, I'm not blaming MT4. The EA stores a lot of data (ie, all the 1X orders not taken),and if there's any change to the parameters after it's in play, you just corrupted theinternal data stream (according to the programmer). That's his explanation for thesingleton negative trades (which Tom's EA never did - there were always positive higherlevel trades in the same basket accompanying any negative trades)-D====================================================

FX Cure EA (TEA Free) 일반 에서 Nov 10, 2013 at 16:05

Hey Patrick and Vontogr, I realize my MT4 was corrupted by old data. So, today I started a new MT4with the new v0.92 EA on all 28 Major/Minor pairs. $50K, 400:1, iRisk 2, mult_filter 1. Here's the link:http://www.myfxbook.com/members/ForexCuredotcom/tea-free-v092/747171 I re-used the old installation but I highly recommend a new MT4 install. If you re-use instead,it's important to do a lot of housecleaning before launching... That means removing any logs and previous EAs and Objects from all charts. Even with that there can stillbe old junk lying around. Before adding in the new ...

FX Cure EA (TEA Free) 일반 에서 Nov 08, 2013 at 04:37

I have never been able to make any backtesting work. Always get errors with any EAand maximum 25% accuracy, So, not interested. Wasted too many days on that. -d=====================================================

FX Cure EA (TEA Free) 일반 에서 Nov 08, 2013 at 04:22

Steve (ForexJack), I know the Tom's EA forum here did spring out in many different directions at times. There are still groups out there on different websites, but I'm not following Tom's EA specifically anymore. I think this EA (if it proves out) or the Trade Copier method on Tom's EA are superior.So, what multiplier_filter did you use? 1? Anything higher and you might not see any activity for many days. Once it starts accumulating data though, the higher level orders will be quite regular.Happy trading..-D===============================================================

FX Cure EA (TEA Free) 일반 에서 Nov 07, 2013 at 06:12

Hey all. I've discussed my weird results with the programmer and he swearsmy problem is corrupt logging due to old variables and objects.So he modified the EA to automatically clean out all objects and global variablesfrom other EAs that may have been run in the past on your MT4 platform.I believe this would be the same as using a freshly installed MT4. I tend to re-use my 30 or so MT4 installations. (bad, I see that now)This weekend I'll re-launch a fresh EA for my own Demo.***Also I'll be sending the new version to everyone who bought it and would suggestyou do the same and downl...

UP_DN_TILL_WIN 트레이딩 시스템 에서 Oct 30, 2013 at 14:31

Hi Osama. Just a suggestion....Perhaps you are too aggressive on the EUR/USD.Terrible price swings the last 3 months...perhaps make 1/3 lot size you are now.And maybe try more stable USD/CAD?I am having excellent results with this plan here:http://www.myfxbook.com/members/ForexCuredotcom/looniebotroboforex-live/670668-Drew====================================================

FX Cure EA (TEA Free) 일반 에서 Oct 29, 2013 at 13:44

Hi Greg. Nice to see this group is still alive.The behaviour was similar on mine, yesterday was a huge correction day andmost 3X, 6X, and 9X orders closed.But I too, am concerned why some single 3X trades and even larger baskets areclosed negative - Tom's EA never did that. I would suggest that, if you have no open orders right now, to delete the EA onevery chart. Then close the MT4 terminal, re launch it, then add the EA back toeach chart with your iRisk=3 setting. Let me know if this behavior continues. My programmer would want this done first.Then we'lll have a repeatable problem - ...

FX Cure EA (TEA Free) 일반 에서 Oct 21, 2013 at 01:07

This is for delanth and anyone who wants to run this EA on limited funds.Get a CENT account at the well known broker RoboForex - they were voted best Forex broker recently.Then with only $1000 real $$ you will play AS IF you had 100 times that amount. I like it for being ableto tweak the lot sizes. We are limited to 0.01 as the smalllest lot size at other brokers but with 100times more - we are now dealling in Cents not Dollars - we can use lots like 0.55 (or 0.0055L in dollars)Also, we will be able to 'safely' use more pairs.just 2 more ¢ to add...;)-d============================...

FX Cure EA (TEA Free) 일반 에서 Oct 17, 2013 at 23:22

Hi Greg, multiplier 0 means ALL trades are opened, including the 1X's - which generally ARE a loss.(but not always) Anyway, on your History, right-click and turn Comments On. You will see theLevel of the orders closed. I would be curious to know if they are 1X or 3X. (it will say somethinglike 'FX_Cure BUY 3' or 'FX_Cure BUY 1' - the 3 is a 3X level order and the 1 is a 1X level order)please let us know...----Now your new demo account with multiplier 3 means ONLY 6X and larger levels trades will be opened.---and this might not be for a week or more, so be patient in this ca...

FX Cure EA (TEA Free) 일반 에서 Oct 16, 2013 at 13:10

Hi all, with regards to the problem I indicated earlier abouthaving singleton negative trades closed, I asked theprogrammer about this and he said that problem wasmy own fault, by changing some parameters of the EAwhile it has collected data. He says to reset the EA ofeach chart - even if there are no open orders! - becausedata is being collected internally on lower level orders, sothere may be data collected internally that gets corruptedwhen you change an EA setting. Here's his reply:"this is some way to avoid that error.- never change timeframe/period and EA setting while EA attach...

FX Cure EA (TEA Free) 일반 에서 Oct 15, 2013 at 23:00

Wow, I just saw 2 new 3X trades closed for negative amount.This is only possible if there is/are additional 6X and/or 9X or largertrades that are positive and larger. I will consult the programmer.Looks to me like a bug here. Tom's EA never would have asingleton negative trade in 3X - it would always be part of a basketwith higher-order positive trades.(I started with iRisk =1 but switched to iRisk = 2, multiplier always = 1)I'll let ya'll know...-d==========================================

FX Cure EA (TEA Free) 일반 에서 Oct 15, 2013 at 13:22

Yes, multiplier = 0 lets in all levels, including all the 1X orders.So, you will have approximately 9 times as many orders as multiplier 1X.But that defeats the purpose - you will likely blow your account too if theiRisk is too high or your Equity is too low.-d=========================================

FX Cure EA (TEA Free) 일반 에서 Oct 14, 2013 at 22:15

Hi David. I had one open on the 11th for GBP/NZDand 2 more just today for EUR/NZD and NZD/JPYSo, it appears something in common is NZD dollar.Did you have the EA enabled on any of these charts?-DREW==================================================

FX Cure EA (TEA Free) 일반 에서 Oct 10, 2013 at 00:50

hi I see there are a few messags to respond to here. I am travelling for Canadian Thanksgiving and will touchbase in a couple days or sooner...-d===================================

FX Cure EA (TEA Free) 일반 에서 Oct 07, 2013 at 22:16

Also,David, to your earlier question...about Backtesting. Yes, there areseveral lines of variable assignments containing language such as:double macd1 = iMACD(NULL, MACD_TF,.....) so I guess the code istesting different timeframes to check for an entry point - and will notwork in a back test. Is that what you where saying?-d========================================

FX Cure EA (TEA Free) 일반 에서 Oct 07, 2013 at 22:10

Got it David. That GBP/JPY loss today was due to my changing the multiplier from 1 to 2.The Oct. 2 order was with setting '1', but was still open when I changed the setting to '2'So, the next GBP/JPY opened (they (baskets) are tracked internally by Magic Number)in the same baske, and the calculations got screwed up. (I know not very technical)So, we find our first Rule now....-->1. Don't change the multiplier_filter setting when there are still open orders (!)I'm not saying it will result in a loss everytime, but I just showed that it can...-D========================...

FX Cure EA (TEA Free) 일반 에서 Oct 07, 2013 at 21:51

David. I will have my programmer look into that as well as someother curious closes, certainly. But it make take a day or two...He responded to your second-last question about -600pip stoploss.Unfortunately, English is not his first language, so I'll have to readhis (really long) response many times and contact him again.Eventually, I'll get the answer.Hey, I did say this was v0.9 ;) ...-d============================================

EURUSD	1.08857	GBPUSD	1.27879	AUDUSD	0.66515
USDJPY	155.876	USDCAD	1.36737	USDCHF	0.89195

ForexCure 에 의한 게시물