Advertisement
FX Cure EA (TEA Free)
Mar 21, 2014 at 06:02
Houston we've got a problem !
Check this out, especially the history. It opens an order every 4pips and TP distance is ridiculous ...
https://www.myfxbook.com/members/Tradydave/cure-096-28-3x-r1/869306
My other demo with same settings (just Risk 3 differs) which was started 5 minutes later or before hasn t opened an order ...
Check this out, especially the history. It opens an order every 4pips and TP distance is ridiculous ...
https://www.myfxbook.com/members/Tradydave/cure-096-28-3x-r1/869306
My other demo with same settings (just Risk 3 differs) which was started 5 minutes later or before hasn t opened an order ...
會員從Jul 02, 2013開始
7帖子
Mar 21, 2014 at 08:29
Hi Drew
I have been monitoring Dave's demo accounts for sometime now. They are very impressive and I hope the performance can be replicated with the new version of the EA. Looking forward to the day when I can load it onto a live account.
Thanks again
Gordon
I have been monitoring Dave's demo accounts for sometime now. They are very impressive and I hope the performance can be replicated with the new version of the EA. Looking forward to the day when I can load it onto a live account.
Thanks again
Gordon
會員從Jul 02, 2013開始
7帖子
Mar 21, 2014 at 08:33
David
Could it be something to do with the decimal places. It is happening on JPY pairs. Maybe the decimal point is not adjusting.
Just my thoughts.
Gordon
Could it be something to do with the decimal places. It is happening on JPY pairs. Maybe the decimal point is not adjusting.
Just my thoughts.
Gordon
Mar 21, 2014 at 15:19
Dave. Have you met the requirements for v0.96?
==> New installation of MT4 v6.00+, which requires all EAs to be
MQL5-compliant. As well older EAs might not be, and can go mental
under the newest MT4. So, make sure, as well, that it is in fact,
v0.96 versionof FX Cure.v0.96 you're using.
Otherwise, I'm not sure how you could have so many large Lot orders,
and so soon after setting up - I say kill it and start anew and clean, no
re-use of anything from prior other Terminals.
I'm going to set up some multiplier_filter = 1 and 3 later today and see.
-Houston out..
-Drew
===========================================
==> New installation of MT4 v6.00+, which requires all EAs to be
MQL5-compliant. As well older EAs might not be, and can go mental
under the newest MT4. So, make sure, as well, that it is in fact,
v0.96 versionof FX Cure.v0.96 you're using.
Otherwise, I'm not sure how you could have so many large Lot orders,
and so soon after setting up - I say kill it and start anew and clean, no
re-use of anything from prior other Terminals.
I'm going to set up some multiplier_filter = 1 and 3 later today and see.
-Houston out..
-Drew
===========================================
Waant aal, lose aal, man...
會員從Jul 02, 2013開始
7帖子
Mar 22, 2014 at 11:25
Hi Greg
Thanks for the info. That roughly correlates with what appears in the experts tab on my MT4 platform.
Thanks
Gordon
Thanks for the info. That roughly correlates with what appears in the experts tab on my MT4 platform.
Thanks
Gordon
Mar 23, 2014 at 16:21
Here's a nice clean (free) Spread Indicator for all your charts.
This will reveal which currency pairs have a huge spread with
your broker and therefore pairs you might not want to trade.
Put it in your \MQL4\Indicators folder, find it in
MT4's "Custom Indicators" list and drag/drop it on any chart.
The defaults should work nicely for most brokers.
-Drew
=========================================
This will reveal which currency pairs have a huge spread with
your broker and therefore pairs you might not want to trade.
Put it in your \MQL4\Indicators folder, find it in
MT4's "Custom Indicators" list and drag/drop it on any chart.
The defaults should work nicely for most brokers.
-Drew
=========================================
附件:
Waant aal, lose aal, man...
Mar 25, 2014 at 10:53
Anyone gotten any trades with setting 3 yet? I am 7 days in with no real trades. Lots of virtual trades. Also setup an account with setting 0 that I will post this evening. I changed the risk level to 10 from 1 to see what would happen without restarting the EA. The EA did not miss a beat. I am going to use this account to try strange things with the EA to see what happens. Have a great day.
Greg
Greg
Mar 25, 2014 at 16:41
Hi Greg.
I started mine on the 19th and just noticed a couple 3X orders but no 6X's
-which is what you're setting is. Risk level will not speed things up. (TP=30)
I've been experimenting with TP values other than 30, viz., TP=10 and
orders do come faster - I had a 12X on Gold in 12 hours! - but GOLD was
quite volatile at the start of this week.
So, one of your experiments could be changing the TP value.
-I am very curious to see what others experience.
==>Right now, I have been having problems with the Virtual data files being
deleted when I close my MT4. (recall these files are only created when multiplier_filter>0)
They 'should' stay put, as advertised.
I would like to hear from any else that's observing this too.
enjoy...
-D
======================================================
I started mine on the 19th and just noticed a couple 3X orders but no 6X's
-which is what you're setting is. Risk level will not speed things up. (TP=30)
I've been experimenting with TP values other than 30, viz., TP=10 and
orders do come faster - I had a 12X on Gold in 12 hours! - but GOLD was
quite volatile at the start of this week.
So, one of your experiments could be changing the TP value.
-I am very curious to see what others experience.
==>Right now, I have been having problems with the Virtual data files being
deleted when I close my MT4. (recall these files are only created when multiplier_filter>0)
They 'should' stay put, as advertised.
I would like to hear from any else that's observing this too.
enjoy...
-D
======================================================
Waant aal, lose aal, man...
會員從Jul 02, 2013開始
7帖子
Mar 26, 2014 at 15:52
At last!
Now in two 0.06 trades. EURCAD and GBPAUD.
Gordon
Now in two 0.06 trades. EURCAD and GBPAUD.
Gordon
會員從Jul 02, 2013開始
7帖子
Mar 26, 2014 at 15:53
Now in two more 0.06 trades AUDCHF AUDJPY
Gordon
Gordon
Mar 28, 2014 at 09:10
Hey Guys,
Can you do me a favor and either setup public Myfxbook access for your demos of Cure 0.96 OR report the average value of TP - entry price for Buy orders or Entry price - TP for Sell orders ?
I notice between 5 and 7 pips for both my demos (X1 and X3) set up on brand new MT4 installs.
I want to compare with what you guys have.
Thanks, Cheers,
Dave
Can you do me a favor and either setup public Myfxbook access for your demos of Cure 0.96 OR report the average value of TP - entry price for Buy orders or Entry price - TP for Sell orders ?
I notice between 5 and 7 pips for both my demos (X1 and X3) set up on brand new MT4 installs.
I want to compare with what you guys have.
Thanks, Cheers,
Dave
Mar 28, 2014 at 20:03
Dave,
Here are the three I am running.
http://www.myfxbook.com/members/chan77/fx-cure-v96/868738/e02MBE6zOStZTH9SSt3j
http://www.myfxbook.com/members/chan77/fxcure-v96-setting-1/874214/CQOitUXEMfWq20FGKTi1
http://www.myfxbook.com/members/chan77/fx-cure-v96-setting-0/874260/55ykXmKUEebyMskIaTuv
fx-cure-v96 is setting 3.
Greg
Here are the three I am running.
http://www.myfxbook.com/members/chan77/fx-cure-v96/868738/e02MBE6zOStZTH9SSt3j
http://www.myfxbook.com/members/chan77/fxcure-v96-setting-1/874214/CQOitUXEMfWq20FGKTi1
http://www.myfxbook.com/members/chan77/fx-cure-v96-setting-0/874260/55ykXmKUEebyMskIaTuv
fx-cure-v96 is setting 3.
Greg
