Edit Your Comment
Myfxbook Autotrade

Tham gia từ Feb 07, 2016
23bài viết
May 24, 2017 at 06:45
Tham gia từ Feb 07, 2016
23bài viết
Has anyone had any trades open for Asia? Were any of those trades profitable?
May 28, 2017 at 07:33
Tham gia từ Dec 25, 2015
3bài viết
My log of trades since I connected to this signal: 9 in profit, 1 loss
26.05.2017 06:04 26.05.2017 07:56 EURAUD Sell 0.21 -50.10 4999.70 1.50825 1.50559 26.6 37.10 1h 51m 0.73% Asia
tag
26.05.2017 04:12 26.05.2017 06:04 EURAUD Buy 0.21 -49.20 5000.40 1.50621 1.50819 19.8 27.57 1h 51m 0.54% Asia
tag
26.05.2017 01:27 26.05.2017 04:12 EURAUD Sell 0.21 -31.90 28.00 1.50325 1.50641 -31.6 -44.05 2h 45m -0.86% Asia
tag
26.05.2017 01:06 26.05.2017 01:24 EURAUD Sell 0.21 -49.60 5000.60 1.50403 1.50341 6.2 8.66 17m 0.17% Asia
tag
26.05.2017 01:06 26.05.2017 01:24 EURJPY Sell 0.21 -49.10 - 125.28000 125.27500 0.5 0.84 17m 0.02% Asia
tag
26.05.2017 00:21 26.05.2017 00:59 EURAUD Sell 0.21 -21.50 4999.80 1.50427 1.50407 2.0 2.79 38m 0.05% Asia
tag
26.05.2017 00:27 26.05.2017 00:44 EURJPY Sell 0.21 -50.70 4999.30 125.40700 125.36300 4.4 7.37 16m 0.14% Asia
tag
22.05.2017 23:56 23.05.2017 00:32 GBPAUD Sell 0.21 -50.70 59.30 1.73924 1.73813 11.1 15.51 35m 0.31% Asia
tag
21.05.2017 23:05 22.05.2017 00:01 EURAUD Sell 0.21 -48.40 61.60 1.50503 1.50396 10.7 14.94 56m 0.30% Asia
tag
21.05.2017 23:34 22.05.2017 00:00 EURCAD Sell 0.21 -50.70 59.30 1.51514 1.51364 15.0 20.81 26m 0.41% Asia
26.05.2017 06:04 26.05.2017 07:56 EURAUD Sell 0.21 -50.10 4999.70 1.50825 1.50559 26.6 37.10 1h 51m 0.73% Asia
tag
26.05.2017 04:12 26.05.2017 06:04 EURAUD Buy 0.21 -49.20 5000.40 1.50621 1.50819 19.8 27.57 1h 51m 0.54% Asia
tag
26.05.2017 01:27 26.05.2017 04:12 EURAUD Sell 0.21 -31.90 28.00 1.50325 1.50641 -31.6 -44.05 2h 45m -0.86% Asia
tag
26.05.2017 01:06 26.05.2017 01:24 EURAUD Sell 0.21 -49.60 5000.60 1.50403 1.50341 6.2 8.66 17m 0.17% Asia
tag
26.05.2017 01:06 26.05.2017 01:24 EURJPY Sell 0.21 -49.10 - 125.28000 125.27500 0.5 0.84 17m 0.02% Asia
tag
26.05.2017 00:21 26.05.2017 00:59 EURAUD Sell 0.21 -21.50 4999.80 1.50427 1.50407 2.0 2.79 38m 0.05% Asia
tag
26.05.2017 00:27 26.05.2017 00:44 EURJPY Sell 0.21 -50.70 4999.30 125.40700 125.36300 4.4 7.37 16m 0.14% Asia
tag
22.05.2017 23:56 23.05.2017 00:32 GBPAUD Sell 0.21 -50.70 59.30 1.73924 1.73813 11.1 15.51 35m 0.31% Asia
tag
21.05.2017 23:05 22.05.2017 00:01 EURAUD Sell 0.21 -48.40 61.60 1.50503 1.50396 10.7 14.94 56m 0.30% Asia
tag
21.05.2017 23:34 22.05.2017 00:00 EURCAD Sell 0.21 -50.70 59.30 1.51514 1.51364 15.0 20.81 26m 0.41% Asia
Tham gia từ Nov 29, 2009
29bài viết
May 28, 2017 at 07:56
Tham gia từ Nov 29, 2009
29bài viết
@wisnie Hello William, are you using demo or real account?
I'm been autotrading Asia and Ninja Trainer on real with IC Markets, because most of other brokers have too high spread on GBPCAD, GBPAUD, GBPCHF and someone also on EURAUD. For example with Pepperstone it's not possible to trade these pairs. Asia's broker is Alpari that has best spread on these pairs and they also more stable during the peaks from 23:00 to 01:00, when the most of Asia's and Ninja Trainer's trades are opened and closed. This is really a problem to autotrade these two signals in real and my research has indicated that the best solution is to use IC Markets.
With IC Markets the trades seem to be good (with some differences from Asia results, due to different spreads between Alpari and IC Markets and the Myfxbook Autotrade spread mark-up on my IC Markets account) but I need more data to give a significative answer.
Moreover, with Asia some trades have been missed by me and also by you (William): I have requested to Myfxbook Support an help about that but I'm still waiting for a reply.
I'm been autotrading Asia and Ninja Trainer on real with IC Markets, because most of other brokers have too high spread on GBPCAD, GBPAUD, GBPCHF and someone also on EURAUD. For example with Pepperstone it's not possible to trade these pairs. Asia's broker is Alpari that has best spread on these pairs and they also more stable during the peaks from 23:00 to 01:00, when the most of Asia's and Ninja Trainer's trades are opened and closed. This is really a problem to autotrade these two signals in real and my research has indicated that the best solution is to use IC Markets.
With IC Markets the trades seem to be good (with some differences from Asia results, due to different spreads between Alpari and IC Markets and the Myfxbook Autotrade spread mark-up on my IC Markets account) but I need more data to give a significative answer.
Moreover, with Asia some trades have been missed by me and also by you (William): I have requested to Myfxbook Support an help about that but I'm still waiting for a reply.
Tham gia từ Nov 30, 2009
135bài viết
May 28, 2017 at 08:22
Tham gia từ Nov 30, 2009
135bài viết
Tham gia từ Apr 23, 2017
17bài viết
May 29, 2017 at 06:20
Tham gia từ Apr 23, 2017
17bài viết
This morning I woke to find that one of my mirrored trades from ninjatrainer made a loss.. no big deal.. not until I look at his account where the same trade made a profit and closed last week... :S
Have asked support to take a look..
Have asked support to take a look..
Tham gia từ Nov 29, 2009
29bài viết
May 29, 2017 at 08:03
Tham gia từ Nov 29, 2009
29bài viết
@tephra
Which broker do you use? Is the trade that made a loss on GBPCAD, GBPAUD or EURAUD?
Anyway, the Support's answer will be: the slippage when the trade has been closed. -:)
Nothing to do about that...
Which broker do you use? Is the trade that made a loss on GBPCAD, GBPAUD or EURAUD?
Anyway, the Support's answer will be: the slippage when the trade has been closed. -:)
Nothing to do about that...
Tham gia từ Feb 22, 2011
4573bài viết
May 29, 2017 at 14:12
Tham gia từ Feb 22, 2011
4573bài viết
tephra posted:
This morning I woke to find that one of my mirrored trades from ninjatrainer made a loss.. no big deal.. not until I look at his account where the same trade made a profit and closed last week... :S
Have asked support to take a look..
Not sure but could it be at they closed trades at Friday evening while your broker was already closed?
Tham gia từ Nov 30, 2009
135bài viết
May 29, 2017 at 14:18
Tham gia từ Nov 30, 2009
135bài viết
jeanluc posted:
@tephra
Which broker do you use? Is the trade that made a loss on GBPCAD, GBPAUD or EURAUD?
Anyway, the Support's answer will be: the slippage when the trade has been closed. -:)
Nothing to do about that...
Slippage is not the only factor. The trade was closed by NinjaTrainer on 23:59 and at 00:01 in my broker (pepperstone). This is 2 minutes later. The latency was too high. So I wonder what can Myfxbook do about this.
See screenshots. The one with the loosing GBPAUD is my Autotrade acc.
exquisite entries with calculated exits
Tham gia từ Apr 23, 2017
17bài viết
May 29, 2017 at 14:25
Tham gia từ Apr 23, 2017
17bài viết
@jeanluc
Pepperstone/standard account
GBPAUD... i've started a new thread on it - not sure when it will show up :)
i understand that there will be a small amount of delay when mirroring orders, however that delay in combination with the market conditions changing during the close causes quite a big problem...
i wish Ninjatrainer just wouldn't close orders so close to market close... but no way to message/contact him/her/them :)
Pepperstone/standard account
GBPAUD... i've started a new thread on it - not sure when it will show up :)
i understand that there will be a small amount of delay when mirroring orders, however that delay in combination with the market conditions changing during the close causes quite a big problem...
i wish Ninjatrainer just wouldn't close orders so close to market close... but no way to message/contact him/her/them :)
Tham gia từ Nov 29, 2009
29bài viết
Tham gia từ Sep 24, 2009
19bài viết
May 29, 2017 at 14:37
Tham gia từ Sep 24, 2009
19bài viết
Same problem here with the GBPAUD trade on Friday close. It closed on Monday morning with loss. I am using pepperstone standard. Is it a slippage issue or mirror issue/time issue?
May 29, 2017 at 14:39
Tham gia từ Dec 09, 2016
4bài viết
jeanluc posted:
@tephra
Which broker do you use? Is the trade that made a loss on GBPCAD, GBPAUD or EURAUD?
Anyway, the Support's answer will be: the slippage when the trade has been closed. -:)
Nothing to do about that...
I had the dsame problem, is this common? But then again I had one trade that was a loss for Ninjatrader but a profit for me.
The trade that the slippage happened on was GBPAUD.
neel@
Tham gia từ Nov 29, 2009
29bài viết
May 29, 2017 at 14:46
Tham gia từ Nov 29, 2009
29bài viết
@Aimak
In fact, slippage is a consequence of latency. But with Ninjia Trainer on GBPAUD and GBPCAD the problem is also about the difference in spreads from Alpari (the Ninjia Trainer's broker) and other brokers, especially between 23:00 and 01:00. Alpari has the very best spreads on GBPAUD and GBPCAD, especially between 23:00 and 01:00 when the spreads grow a lot.
In fact, slippage is a consequence of latency. But with Ninjia Trainer on GBPAUD and GBPCAD the problem is also about the difference in spreads from Alpari (the Ninjia Trainer's broker) and other brokers, especially between 23:00 and 01:00. Alpari has the very best spreads on GBPAUD and GBPCAD, especially between 23:00 and 01:00 when the spreads grow a lot.
Tham gia từ Apr 27, 2017
15bài viết
May 29, 2017 at 14:48
Tham gia từ Apr 27, 2017
15bài viết
Could also be the spread. Some brokers have a huge spread on those pairs
Tham gia từ Apr 23, 2017
17bài viết
May 29, 2017 at 14:58
Tham gia từ Apr 23, 2017
17bài viết
Support says they will contact ninjatrainer and ask him not to close orders right before market close.. dunno how that will pan out, but it's better than nothing.. hehe
It happened on the 19th as well.. profit, just less than what ninjatrainer achieved...
It happened on the 19th as well.. profit, just less than what ninjatrainer achieved...
Tham gia từ Nov 29, 2009
29bài viết
May 29, 2017 at 15:02
Tham gia từ Nov 29, 2009
29bài viết
tephra posted:
Support says they will contact ninjatrainer and ask him not to close orders right before market close.. dunno how that will pan out, but it's better than nothing.. hehe
It happened on the 19th as well.. profit, just less than what ninjatrainer achieved...
@tephra
You are right... it's better than nothing 😁
Tham gia từ Nov 30, 2009
135bài viết
May 30, 2017 at 06:17
Tham gia từ Nov 30, 2009
135bài viết
jeanluc posted:
@Aimak
In fact, slippage is a consequence of latency. But with Ninjia Trainer on GBPAUD and GBPCAD the problem is also about the difference in spreads from Alpari (the Ninjia Trainer's broker) and other brokers, especially between 23:00 and 01:00. Alpari has the very best spreads on GBPAUD and GBPCAD, especially between 23:00 and 01:00 when the spreads grow a lot.
Yes, you are correct. However, I am not talking about slippage, as price change, but latency for the order mirroring. 2 minutes for mirroring a trade is way too much knowing that the usual latency between NY and London is 76 milliseconds (supposing autotrade server is based in London)
exquisite entries with calculated exits
May 30, 2017 at 07:01
Tham gia từ Dec 09, 2016
4bài viết
danwe1987 posted:
There ist something on about Autotrade.
No trades are opend, any serious issues here?
Asia and Ninja trades are not copied. Master has trades and the followers not.
I hads the same problem. Support said it maybe that the broker has restrictions as to how many instruments can be traded. They advised to reduce this to you're brokers limit by delecting ones you don't want copied. You can do this by going to Autotrade, click on the settings (cog icon) and then untick the ones you don't want.
neel@
Tham gia từ Apr 23, 2017
17bài viết
May 31, 2017 at 05:51
Tham gia từ Apr 23, 2017
17bài viết
@danwe1987
U should probably count your lucky stars that your trade copies wernt working.. today wasn't so good for them... :S
U should probably count your lucky stars that your trade copies wernt working.. today wasn't so good for them... :S

*Nghiêm cấm sử dụng cho mục đích thương mại và spam, nếu vi phạm có thể dẫn đến việc chấm dứt tài khoản.
Mẹo: Đăng ảnh/url youtube sẽ tự động được nhúng vào bài viết của bạn!
Mẹo: Dùng @ để tự động điền tên người dùng tham gia vào cuộc thảo luận này.